Artwork description:

Herringfleet Mill or Walker's Mill is a Grade II* listed smock mill at Herringfleet, Suffolk, England, now in a bad state of repair with two of the 4 sails removed.

The mill was erected in c1820 by millwright Robert Barnes of Great Yarmouth. It was disused in 1883 but later put back to work. The mill was worked by wind until 1956. Her owners, the Somerleyton Estate were keen to ensure that she was preserved. East Suffolk County Council agreed in principle that the mill should be preserved, and approached the Ministry of Works who agreed to pay half the cost of the restoration. Most of the rest of the money came from East Suffolk County Council and the Suffolk Preservation Society, with smaller amounts from other groups.

Restoration of the mill was undertaken by Thomas Smithdale Sons, the Acle millwrights. The mill was officially opened on 25 July 1958 by Charles Howlett, who had been a Marshman at the mill for over forty years. Further restoration work was done in 1971 by Neville Martin, the Beccles millwright.

Herringfleet Mill is an octagonal three-storey smock mill with a boat-shaped cap. Winding is by tailpole and winch, the last mill on the Broads. The four Common sails are carried on a cast-iron windshaft. The wooden brake wheel has 59 teeth. It drives a 4 feet 6 inches (1.37 m) cast-iron wallower with 47 cogs. The wallower is mounted on an 11+3⁄4 inches (300 mm) square upright shaft. At the bottom of the upright shaft, a cast-iron bevel gear with 33 teeth drives a cast-iron pit wheel with 102 cogs. The pit wheel is carried on a cast-iron shaft 8 inches (200 mm) in diameter. This shaft has at its outer end a 16-foot (4.88 m) by 9-inch (230 mm) scoopwheel. The mill could pump 2,000 imperial gallons (9,100 L) of water per minute.


This piece of Art is made from - Archival 310gsm Baryta Photographic Paper..and not forgetting the passion, love, determination, creativity, imagination and skills required to produce it.

Materials used:

Baryta 310gsm Archival paper

Tags:
#landscape #water #calm #tranquillity #herringfleet windmill #pituresque #herringfleet suffolk 

Herringfleet Windmill Sepia (2024) Photograph
by Michael McHugh

£90

Loading

Artwork description
Minus

Herringfleet Mill or Walker's Mill is a Grade II* listed smock mill at Herringfleet, Suffolk, England, now in a bad state of repair with two of the 4 sails removed.

The mill was erected in c1820 by millwright Robert Barnes of Great Yarmouth. It was disused in 1883 but later put back to work. The mill was worked by wind until 1956. Her owners, the Somerleyton Estate were keen to ensure that she was preserved. East Suffolk County Council agreed in principle that the mill should be preserved, and approached the Ministry of Works who agreed to pay half the cost of the restoration. Most of the rest of the money came from East Suffolk County Council and the Suffolk Preservation Society, with smaller amounts from other groups.

Restoration of the mill was undertaken by Thomas Smithdale Sons, the Acle millwrights. The mill was officially opened on 25 July 1958 by Charles Howlett, who had been a Marshman at the mill for over forty years. Further restoration work was done in 1971 by Neville Martin, the Beccles millwright.

Herringfleet Mill is an octagonal three-storey smock mill with a boat-shaped cap. Winding is by tailpole and winch, the last mill on the Broads. The four Common sails are carried on a cast-iron windshaft. The wooden brake wheel has 59 teeth. It drives a 4 feet 6 inches (1.37 m) cast-iron wallower with 47 cogs. The wallower is mounted on an 11+3⁄4 inches (300 mm) square upright shaft. At the bottom of the upright shaft, a cast-iron bevel gear with 33 teeth drives a cast-iron pit wheel with 102 cogs. The pit wheel is carried on a cast-iron shaft 8 inches (200 mm) in diameter. This shaft has at its outer end a 16-foot (4.88 m) by 9-inch (230 mm) scoopwheel. The mill could pump 2,000 imperial gallons (9,100 L) of water per minute.


This piece of Art is made from - Archival 310gsm Baryta Photographic Paper..and not forgetting the passion, love, determination, creativity, imagination and skills required to produce it.

Materials used:

Baryta 310gsm Archival paper

Tags:
#landscape #water #calm #tranquillity #herringfleet windmill #pituresque #herringfleet suffolk 
14 day money back guaranteeFree returns

14 day money back guaranteeLearn more


Visit Michael McHugh shop

Michael McHugh

Location United Kingdom

About
The camera gives me the ability to see things, that in passing the eye might miss. I find that the viewfinder slows you down when searching for that perfect... Read more

View all