- By medium
- By subject
- By budget
- Sales
- Gift cards
- Discover all art
- Artists
- Editors’ picks
- Ideas
Artwork description:
Herringfleet Mill or Walker's Mill is a Grade II* listed smock mill at Herringfleet, Suffolk, England, now in a bad state of repair with two of the 4 sails removed.
The mill was erected in c1820 by millwright Robert Barnes of Great Yarmouth. It was disused in 1883 but later put back to work. The mill was worked by wind until 1956. Her owners, the Somerleyton Estate were keen to ensure that she was preserved. East Suffolk County Council agreed in principle that the mill should be preserved, and approached the Ministry of Works who agreed to pay half the cost of the restoration. Most of the rest of the money came from East Suffolk County Council and the Suffolk Preservation Society, with smaller amounts from other groups.
Restoration of the mill was undertaken by Thomas Smithdale Sons, the Acle millwrights. The mill was officially opened on 25 July 1958 by Charles Howlett, who had been a Marshman at the mill for over forty years. Further restoration work was done in 1971 by Neville Martin, the Beccles millwright.
Herringfleet Mill is an octagonal three-storey smock mill with a boat-shaped cap. Winding is by tailpole and winch, the last mill on the Broads. The four Common sails are carried on a cast-iron windshaft. The wooden brake wheel has 59 teeth. It drives a 4 feet 6 inches (1.37 m) cast-iron wallower with 47 cogs. The wallower is mounted on an 11+3⁄4 inches (300 mm) square upright shaft. At the bottom of the upright shaft, a cast-iron bevel gear with 33 teeth drives a cast-iron pit wheel with 102 cogs. The pit wheel is carried on a cast-iron shaft 8 inches (200 mm) in diameter. This shaft has at its outer end a 16-foot (4.88 m) by 9-inch (230 mm) scoopwheel. The mill could pump 2,000 imperial gallons (9,100 L) of water per minute.
This is FRAMED - Acid-Free Double Mount, Black Solid Wood Frame, Anti-reflective Acrylic Glazing, Acid-Free Mounting Board behind the photograph, and a 2mm backing Board. Brass wire fixtures for hanging.
Materials used:
Baryta 300gsm Archival paper, Solid Wood frame, Archival Mount, anti reflective clear acrylic
Tags:
#landscape #river #calm #tranquil #picturesque #suffolk #herringfleet windmillHerringfleet Windmill FRAMED (2024) Photograph
by Michael McHugh
£315
- Photograph on Paper
- From a limited edition of 10
- Size: 47 x 62.5 x 2cm (framed) / 30 x 45.5cm (actual image size)
- Framed and ready to hang
- Signed and numbered certificate of authenticity
- Style: Photorealistic
- Subject: Landscapes, sea and sky
Loading
Artwork description
Herringfleet Mill or Walker's Mill is a Grade II* listed smock mill at Herringfleet, Suffolk, England, now in a bad state of repair with two of the 4 sails removed.
The mill was erected in c1820 by millwright Robert Barnes of Great Yarmouth. It was disused in 1883 but later put back to work. The mill was worked by wind until 1956. Her owners, the Somerleyton Estate were keen to ensure that she was preserved. East Suffolk County Council agreed in principle that the mill should be preserved, and approached the Ministry of Works who agreed to pay half the cost of the restoration. Most of the rest of the money came from East Suffolk County Council and the Suffolk Preservation Society, with smaller amounts from other groups.
Restoration of the mill was undertaken by Thomas Smithdale Sons, the Acle millwrights. The mill was officially opened on 25 July 1958 by Charles Howlett, who had been a Marshman at the mill for over forty years. Further restoration work was done in 1971 by Neville Martin, the Beccles millwright.
Herringfleet Mill is an octagonal three-storey smock mill with a boat-shaped cap. Winding is by tailpole and winch, the last mill on the Broads. The four Common sails are carried on a cast-iron windshaft. The wooden brake wheel has 59 teeth. It drives a 4 feet 6 inches (1.37 m) cast-iron wallower with 47 cogs. The wallower is mounted on an 11+3⁄4 inches (300 mm) square upright shaft. At the bottom of the upright shaft, a cast-iron bevel gear with 33 teeth drives a cast-iron pit wheel with 102 cogs. The pit wheel is carried on a cast-iron shaft 8 inches (200 mm) in diameter. This shaft has at its outer end a 16-foot (4.88 m) by 9-inch (230 mm) scoopwheel. The mill could pump 2,000 imperial gallons (9,100 L) of water per minute.
This is FRAMED - Acid-Free Double Mount, Black Solid Wood Frame, Anti-reflective Acrylic Glazing, Acid-Free Mounting Board behind the photograph, and a 2mm backing Board. Brass wire fixtures for hanging.
Materials used:
Baryta 300gsm Archival paper, Solid Wood frame, Archival Mount, anti reflective clear acrylic
Tags:
#landscape #river #calm #tranquil #picturesque #suffolk #herringfleet windmill
Free returns14 day money back guaranteeLearn more
